Connect a Modbus TCP/IP Controller to an EtherNet/IP PLC

Get Modbus TCP/IP Client Devices into your EtherNet/IP architecture

SKU: 460ESMS

460ESMS

$NZD 1,232.06 - $NZD 1,719.42

Clear

Please note, site orders are made via credit card. Please contact sales@techstep.co.nz if you require support to purchase directly.

Product Description

The Smart Way To Move Modbus TCP Data to an EtherNet/IP Client
The 460ESMS connects Modbus TCP Client Devices to EtherNet/IP PLCs. It’s the perfect tool to integrate cost effective Modbus TCP controllers into your EtherNet/IP architecture.

With the 460ESMS you have a device that you can quickly deploy and easily configure to access and integrate these Modbus devices into your EtherNet/IP network.

How Does the 460ESMS Work?
For Most applications the mapping is very straight forward. Modbus Register and Coil data is mapped to EtherNet/IP IO Block. Up to 480 bytes of data can be mapped in each direction between protocols.

It really is that simple.

Need to modify your data as it passes from one protocol to the other? No problem. Each data mapping you apply can be modified with up to 3 mathematic functions. Add 4 to a value, multiply by 4 and divide by 10 with ease.

Why Use Real Time Automation as a Gateway Supplier?
The 460ESMS provides an option to connect a Modbus TCP/IP Client device to an EtherNet/IP Scanner device. While there are certainly a number of other companies offering stand alone gateways, there is no one who provides the level of support and service that you receive from RTA.

When you call, a live person answers the phone. When you talk with sales, you will get honest answers and recommendations even if that means recommending someone else’s solution. When you get support, it is from an engineer who had a hand in the product’s development, and support doesn’t require a ticket or 24 hour wait. We are unashamed of the fact that we are a smaller company because that means you mean a lot more to us.

  • Manual
  • 3’ power cable with flying leads
  • 5-year hardware warranty
  • IPSetup software — automatically locates RTA gateway on the network
  • Unlimited firmware feature upgrades for life
  • CAT5 cross over cable for direct connection to PC during programming
  • Complete, unlimited access to our industry leading support staff

Ethernet/IP Adapter Features

Operation Modes: EtherNet/IP Adapter
Message Support: Implicit, Explicit UCMM
Data Types: BIT8,16 & 32; INT8, 16, 32 & 64; UINT8,16, 32 & 64; Float & Double
Maximum EtherNet/IP Scanner Devices: Up to 10 can listen, only one can write I/O
Max Data Per Adapter Connection: Up to 480 bytes in each direction

Modbus TCP/IP Server Features

Modbus Operation Modes: Modbus TCP/IP Server
Function Codes Supported: 1, 2, 3, 4, 5, 6, 7, 15 & 16
Swapping: Byte and Word Swapping
Maximum Modbus TCP/IP Client Connections: 10
Contiguous Data Areas: 200 Total - 100 reads & 100 writes
Data Area Limits: 500 Contiguous Coils or 500 Contiguous Registers

Gateway Security
You can configure up to nine different users with access to diagnostic and configuration screens.

Alarming
Set <, <=, >=, >, ==, !=, and Change-of-State rules on any data moving through the gateway. If alarm rule is triggered an email notification can be sent.

Translation Table
Allows for data manipulation during protocol translation. Scaling and other data format changes can occur in the gateway.

Status and Counters
Protocol specific status, counters and error messages are accessible within the gateways diagnostics page. They can also be delivered to a connected device.

Diagnostic Logging Page
Allows users to see and log start up sequences, protocol specific messages & error messages.

460ESMS-N2E
DATASHEET  USERGUIDE
460ESMS-N2EW
DATASHEET  USERGUIDE
460ESMS-N34
DATASHEET  USERGUIDE
460ESMS-NNA1
DATASHEET  USERGUIDE