Connect a DeviceNet Master to DF1 Devices
Easily map your legacy PLC data into a DeviceNet Master
460DSDFM
$NZD 1,343.69 - $NZD 1,448.54
Please note, site orders are made via credit card. Please contact sales@techstep.co.nz if you require support to purchase directly.
Product Description
Map Your Legacy PLC Data Tables Into a DeviceNet Master
You can now make your legacy serial PLCs look like a DeviceNet Slave. Any of your old, serial PLCs like the PLC5, SLC, or MicroLogix can now provide cyclic data to a DeviceNet Master.
It’s the perfect tool to keep those old legacy PLCs from the scrap pile and be useful in a DeviceNet environment.
How Do I Use the 460DSDFM in My Application?
The mapping is very straight forward. PLC data table values like N7:200 and F9:1 are mapped directly into the Input and Output assemblies of the cyclic data transfer.
No special message instructions or ladder logic is required to access the data table of the DF1 PLCs.
It really is that simple.
Why Use Real Time Automation as a Gateway Supplier?
While there are certainly a number of other companies offering gateways, there is no one who provides the level of support and service that you receive from RTA. When you call, a live person answers the phone. When you talk with sales, you will get honest answers and recommendations. When you get support, it is from an engineer who had a hand in the product’s development, and support doesn’t require a ticket or 24-hour wait.
Try the RTA difference today.
- Manual
- 3’ power cable with flying leads
- 5-year hardware warranty
- IPSetup software — automatically locates RTA gateway on the network
- Unlimited firmware feature upgrades for life
- CAT5 cross over cable for direct connection to PC during programming
- Complete, unlimited access to our industry leading support staff
DeviceNet Slave Features
DeviceNet Operation Modes: DeviceNet SlaveSupported Data Types: Int8, int16, int32, int64, uint8, uint16, uint32, uint61, float, double float, binary8, binary16, binary32
Maximum Connections: 1
Maximum Input Size: 240 Bytes in up to 15 Data Groups
Maximum Output Size: 240 Bytes in up to 15 Data Groups
DF1 Master Features
Operation Modes: DFM Full Duplex and DFM Half DuplexPLCs Supported: MicroLogix 1000, SLC 5/03 5/04 5/05, most PLC5s
Maximum number of Devices supported: 1 in Full Duplex Mode, 32 in Half Duplex
Data Type Supported: 100 Integers or 100 Binaries, or 50 floats, 82 character string per scan line
Scan lines: 100 input, 100 output
Physical Connections: RS485 and RS232
Gateway Security
You can configure up to nine different users with access to diagnostic and configuration screens.
Alarming
Set <, <=, >=, >, ==, !=, and Change-of-State rules on any data moving through the gateway. If alarm rule is triggered an email notification can be sent.
Translation Table
Allows for data manipulation during protocol translation. Scaling and other data format changes can occur in the gateway.
Status and Counters
Protocol specific status, counters and error messages are accessible within the gateways diagnostics page. They can also be delivered to a connected device.
Diagnostic Logging Page
Allows users to see and log start up sequences, protocol specific messages & error messages.
Related Resources
OUR COMPLETE SATISFACTION GUARANTEE
Every RTA gateway provided by Tech Step comes with a 30 DAY 100% SATISFACTION GUARANTEE. If an application falls through, you find an alternative, or if you just wanted to try out a gateway -if for any reason you are not 100% satisfied, you can return the unit for a refund of the purchase price.
In addition, every gateway comes with a 5 YEAR BETTER THAN INSURANCE WARRANTY.You will never have to blame the dog for eating your gateway. We don’t care if you let out the magic black smoke confusing AC with DC power or if you run the unit over with a forklift. Even if you break it, we will fix it or replace it at no cost for 5 years after purchase. That’s the RTA way.